- Locks[10]
- Fingerprint Access Control[10]
- Access Control Card Reader[10]
- Time Recording[3]
- Access Control System[10]
- Facial Recognition System[7]
- Video Door Phone[10]
- Other Access Control Products[10]
- Access Control Keypad[9]
- Access Control Card[10]
- AC/DC Adapters[1]
- Doors[8]
- Other Door & Window Accessories[2]
- Traffic Barrier[2]
- Other Security & Protection Products[10]
- Parking Equipment[6]
- Traffic Cone[4]
- Lock Parts[4]
- CCTV DVR[10]
- EAS System[1]
- Alarm[4]
- Fiber Optic Equipment[1]
- Contact Person : Ms. NI EN
- Company Name : Shenzhen Grand-Access Security Co., Limited
- Tel : 0086-755-83972653
- Fax : 0086-755-83972653
- Address : ,,Building A, Huishang Industrial Zone in the North of Longhua Street,Baoan District, Shenzhen, China
- Country/Region : China
- Zip : 518109
Wireless Magnetic Door Sensor Magnetic Contact
Related Product Searches:Wireless Magnetic Door Sensor Magnetic Contact,High Quality,wireless door sensor, magnetic door sensor,Alarm
CE met wireless door sensor magnetic door sensor magnetic contact
When two parts of the door/window sensor are separated,the sensor will send out an alarm signal and the alarm control panel will receive the signal and dialout pre-set phone numbers to inform the alarm.
Power supply: DC9V battery Working frequency: 315MHz/433MHz Gap for triggered, >15-20mm Stand-by current: 0.01W Alarm current: 0.09W Working temperature:-10 ~ 50 Relative humidity: d 95% Size: 80x50x 16mm
Installation of door/window magnetic sensor Load batteries in part A of the wireless door/window magnets and fix the same on doors/window frames to be monitored, and part B on the doors/windows, as close to each other as possible, as shown in Figure. (We recommend fix parts A and B with screws. The screw holes of part A are located in the mounting board, which should be punched using hard objects).
Test of door/window magnetic sensor
After installation, pull the antenna to the full length. Open the doors/windows to be monitored, the red light on the magnet will be on, at the same time, there will be alarming sounds and indication on both console and the handset. If the red light on the magnet is not on, please check whether the “Low volt indicator” is on. If it is, please replace the batteries. Otherwise, please contact the supplier.
Wide Applicability
Applies widely to works, banks, stores, warehouses, offices and homestead, thanks to its kinds of protection abilities like anti-theft, anti-robbery, fire prevention, gas leakage protection and most importantly, emergency calls.
Wireless Magnetic Door Sensor Magnetic Contact
